服务热线:400-605-1839
新闻资讯
三固智能锁SRM8156使用说明书
新闻来源:东莞市三固软件科技有限公司
发布时间:2016.08.09 浏览次数:

一、功能与操作

II. Funtion and operation

 

1. 添加指纹

1. Add fingerprint

 

短按”SET”键,蓝灯闪烁,录入指纹,"嘀""滴"两短声表示第一次指纹录入成功,移开手指后需再次录入同一枚指纹(指纹添加需要两次录入确认),"嘀"长鸣一声,同时蓝灯长亮,即表示指纹添加成功,可连续添加多枚指纹,如果没有任何操作10S会自动退出添加状态。

Short press the "set" button, the blue light flashes, the uesrs will input fingerprint, then two short sound of "di" "di" represents the first input of fingerprint is successful, after moveing the finger, the users need to press the same fingerprint again(the operation of add fingerprint demands two identification of fingerprint), a long ring of "di" happens simultaneously with the long shine of blue light, which presents the operation of adding fingerprint succeed. It is worth mentioning that the users can add more fingerprint. Therefore, the system will automatically exit the adding status when the time of withouting any operations exceeds ten seconds.

 

 

       :添加指纹的过程中,如果出现"嘀"、"嘀"、"嘀"短鸣3声,同时红灯闪烁3次,则表示该指纹已经存在,不能重复添加。

 

Notes: Though the process of the adding fingerprint, if you hear three short ring of "di" "di" "di", at the same time, the red light has a triple flash, which implies the fingerprint had exist in system.  

 

 

2. 删除所有指纹

2. Delete all fingerprints

 

 

按下"ERASE"键,同时红灯快速闪烁,长按10秒,"嘀"声长鸣,删除成功,自动退出删除状态。

Press the "ERASE" button, and the red light has a quick shine along with it, next you make a long press for ten seconds, then the delete operation succeeds and the system will automatically exit the adding status.

 

3. 其它

3. Others

 

 

Ø  连续输入错误指纹超过5次,锁定60秒,锁定期间不响应任何操作。

Ø  If you input false fingerprint more than five times continuously, the system will be locked for sixty seconds , in this time it can’t any operation

Ø  连续检测到低压开门20次后,将不允许用户开启门锁。更换新电池后,可恢复正常开门动作。

 

Ø  With the continuous detecting the low voltage door more than twenty times, the operation of opening the door is unallowed. After replacing the new battery, the user can recover the normal action of opening door.

 

三、声光提示表

III. Acousto-optic prompt table

 

            门锁模块声光提示表

声音

提示信息

长鸣一声,蓝灯亮

操作成功

短鸣二声

操作提示

短鸣3声,红灯闪3

操作失败

短鸣6声,红灯闪6

电压过低

“哩”“咪”

开锁

“哩”“哆”

关锁

红灯闪烁1分钟

门锁处于锁定状态

 

acousto-optic prompt table of the door lock module

 

sound

Prompt message

a long ringa blue light

the operation succeeds

two short rings

the operation tips

three short ringsthe red lightflashs three times

the operation failed

six short ringsthe red light flashes six times

voltage is too low

“duo”li”“mi

lock is on

“mi”li”“duo

lock is off

the red light flashes for one minute

lock is in lock-out state


 

上一篇:三固新款8250说明以及开孔图
下一篇:购买指纹锁是为了更安全还是为了更便捷
智能防盗锁  |  酒店门锁系统  |  产品中心  |  解决方案
工程案例  |  招商加盟  |  走进三固  |  电脑版
Copyright © 广东三固科技有限公司 版权所有
粤ICP备19159436号